LATHE

MIG WELDING

The "Metal" in Gas Metal Arc Welding refers to the wire that is used to start the arc. It is shielded by inert gas and the feeding wire also acts as the filler rod. MIG is fairly easy to learn and use as it is a semi-automatic welding process.

SOME OF MA WORK

BRAZING

PPE REQUIRED

THIS IS USED FOR BRAZING

MY WORK

i was working on a given task

DRILLING AND TAPPING

Today i went to do drilling and tapping with steve (tutor). It was a good experience for me. Images of the work i have done in workshop

TOOLS USED DURING..

ELECTRICAL

HAMMERS & HACKSAWS

1.What is the name of the hammer most commonly used in automotive engineering? ANSWER- Ball Pein or engineers hammer 2.what would you typically use one for? ANSWER- Used for flattening or peining a rivet. 3.why would you use a soft faced hammer? ANSWER- used to tap a component 4.what type of hammer would you use to give a really strong blow to a chisel? ANSWER- Lump hammer 5.what would you use a mallet for in automotive engineering? ANSWER- used for moving things where it is important without giving any damage. 6.when would you use a dead blow hammer? ANSWER- Designed not to bounce back when its hits something. 7. what can cause an hacksaw to clog? ANSWER- If a blade cutting through a thick section of metal has too many teeth, in other words the pitch is too fine, they can clog up and stop cutting. 8. What can happen if the blade is to coarse for the job it is intended for? ANSWER- If the blade is too coarse the saw teeth could be stripped off of the blade at it try's to cut. 9. What should you do before and after using a hacksaw? ANSWER- use ppe

Engineering Technology.

WELDING MISSION

Today we went to workshop to learn how to weld stuff. At first it was scary for me but as we went thru the safety hazards of welding, it was getting interesting.

OXY WELDING

SAFETY GEARS NEED FOR WELDING

DRILL GAUGE MISSION

Today we went to the workshop , start making a drill gauge. we had this small thin piece of metal , then we inked it to do some measuring stuff on it and then we start cutting it according to our plan and now am in process of drilling different size of drills in it. It was good experience for me. IMAGES OF MA WORK

TOOLS USED DURING..

files

scriber

drills

hacksaw

MICROMETER SHEET

How a turbo works

FIRST AID COURSE

14/8/12 wed Today we had the first aid course. I had a chance to learn about how to live healthy and ignore bad food , I learned about the diseases which we can get easily at this young age. We al went thru this booklet which contains all the details we need to know about health and safety.

CAMSHAFT

SOME IMAGES OF CAMSHAFT THAT I TOOK OUT OF ENGINE

DAY 3 Today we went to the workshop starting measuring the valves and then the pistons. we learned about the piston rings and the cool plugs and their purpose.At last we took out the crankshaft and was measuring the lobes.

SOME ENGINE PARTS

IMAGES OF SOME TOOLS AND PARTS OF ENGINE

MICROMETER

PISTON RING

BOLTS AND NUTS

ENGINE STAND

SOCKETS

SHELL BEARINNG

WATER PUMP